Safety & Engineering Services

Three domains, one firm: 52 service pages covering engineering design, environmental compliance, and health & safety consulting under one P.Eng.

🛡 Health & Safety ☀ Renewables & Storage ⚡ Electrical & Power 🔧 Specialty Power 📊 Energy & Lighting 🌿 Environmental
Free Solar Study → Get a Project Estimate →
The RHEM Difference

Why One Firm Matters

🔗

No Gap Between Domains

Solar design informs the electrical service sizing. The arc flash study shapes the LOTO procedures. Everything speaks to each other when it comes from one team.

📋

Single P.Eng Accountability

One named engineer of record across your scope. No passing-the-buck between firms when AHJ questions arise or field conditions change.

💰

Bundle Savings

Scopes that would require three separate engineering firms are handled under one agreement: with bundled pricing and a single point of contact.

All Services

Explore Our Full Capability

🛡 Health, Safety & Compliance

🏆
COR Program Development
Full safety management system from gap analysis to external audit readiness. Policies, procedures, hazard ID, incident investigation, training matrix, mock audit.
COR StandardIHSACSA Z1000
From $7,500
🏗
Construction Safety Plans
Site-specific Construction Safety Plans (CSP), fall protection plans, traffic management, crane lift plans. Compliant with O.Reg 213/91.
OHSAO.Reg 213/91CSA Z460
From $3,600
📋
Job Hazard Analysis (JHA)
Task-specific JHAs and Safe Work Procedures (SWPs) for field crews. Step-by-step hazard identification with controls hierarchy.
CSA Z1000OHSAIHSA
From $2,300
⚠️
Hazard Assessment & Risk Register
Facility-wide hazard identification, risk scoring matrix, control gap analysis. Priority-ranked action plan with regulatory references.
CSA Z1000OHSAISO 45001
From $4,600
🚨
Emergency Response Plans
Emergency preparedness and response procedures: fire, chemical spill, medical emergency, evacuation routes, muster points, communication trees.
OHSAO.Reg 213/91NFPA
From $2,900
🔐
Lockout/Tagout (LOTO) Procedures
Equipment-specific energy control procedures, LOTO program development, verification protocols. Integrated with arc flash study when applicable.
CSA Z460OHSANFPA 70E
From $3,200
🕳
Confined Space Entry Program
Confined space identification, atmospheric monitoring protocols, entry permits, rescue plans. CSA Z1006 compliant.
CSA Z1006OHSAO.Reg 632/05
From $2,900
🎓
Safety Training Program Development
Training needs assessment, competency matrix, orientation packages, toolbox talk libraries, training records management system.
OHSAIHSACSA Z1000
From $4,000
🔍
OH&S Audit & Gap Analysis
Full audit against COR, ISO 45001, or provincial standards. Gap report with prioritized action plan and compliance roadmap.
COR StandardISO 45001OHSA
From $4,600
⚡
Arc Flash Safety & PPE Program
IEEE 1584 arc flash study, NFPA 70E/CSA Z462 arc flash warning labels, PPE selection matrix, electrical safe work practices.
IEEE 1584NFPA 70ECSA Z462
From $4,300
🧭
Not sure which H&S services you need?

Take our 2-minute safety assessment: get a personalized compliance roadmap based on your industry, company size, and hazard profile.

Take H&S Assessment →
🛡 Safety Consulting: Dedicated H&S Specialist

Our H&S practice is led by a dedicated health & safety specialist: not an engineering add-on. COR programs, JHAs, LOTO procedures, and safety training are developed independently to audit-ready standards. When engineering and safety scopes overlap (arc flash, fall protection for solar), the two teams coordinate directly.

View H&S Services →

☀ Renewable Energy & Storage

☀️
Solar PV Design
Rooftop, ground-mount, and carport arrays. HelioScope/PVsyst simulation, shade analysis, string sizing, permit-ready drawings.
HelioScopePVsystAurora
From $2,500
🔋
Battery Storage (BESS)
Storage sizing, dispatch strategy, backup load analysis, grid interconnection for residential and commercial BESS.
HOMEREnergy Toolbase
From $3,200
🚗
EV Charging Infrastructure
Level 2 and DCFC design, load management (OCPP/OSCP), permit drawings, ZEVIP incentive support.
AutoCADETAP
From $2,500
🛸
Drone Survey & 3D Capture
Aerial site surveys, orthomosaic mapping, 3D point clouds, thermal imaging for solar arrays, roof condition assessment.
DJIPix4DAutoCAD
From $1,500

⚡ Electrical & Power Systems

⚡
Electrical Engineering
Load calculations, panel schedules, SLDs, permit drawing sets, CEC-compliant. From residential to large commercial.
AutoCADETAPSKM
From $4,000
🔬
Power Systems Studies
Arc flash (IEEE 1584), short circuit, load flow, coordination, PF correction, harmonics (IEEE 519).
ETAPOpenDSSEasyPower
From $4,500
🔗
Interconnection Support
Net metering applications, DER interconnection packages, utility liaison, protection relay settings.
AutoCADETAP
From $2,800
🔧
Commissioning & Startup
Factory acceptance testing, site acceptance testing, point-to-point verification, functional performance testing, commissioning reports.
MeggerFlukeETAP
From $3,000

🔧 Specialty Power Systems

⚡
Power Factor Correction
Capacitor bank sizing, harmonic filter design, power factor penalty elimination, reactive power compensation studies.
ETAPIEEE 18IEEE 519
From $2,000 + equipment
🔥
Generator & Standby Power
Standby and emergency generator sizing, automatic transfer switch design, fuel system layout, load shedding sequences.
ETAPAutoCAD
From $3,500
🌍
Grounding System Design
Grounding grid design, soil resistivity testing, step and touch voltage analysis, lightning protection system design.
ETAPCDEGSAutoCAD
From $4,000
🛡
Surge Protection
SPD selection and coordination, transient voltage analysis, cascade protection design, equipment vulnerability assessment.
ETAPIEEE C62
From $2,000
⚡
Medium Voltage Design
MV switchgear layout, cable ampacity and routing, relay protection coordination, substation design up to 44 kV.
ETAPAutoCADCYMCAP
From $5,500
📊
Power Monitoring
Metering system design, power quality monitoring, SCADA integration, energy dashboards, sub-metering for tenant billing.
ETAPSchneider ION
From $2,200
🔌
Transformer Studies
Transformer sizing, impedance testing, tap changer coordination, oil analysis interpretation, replacement planning.
ETAPAutoCAD
From $3,500
📋
Engineer of Record (EOR)
Ongoing P.Eng oversight for construction and commissioning. Shop drawing review, RFI responses, field modifications, and regulatory sign-off.
P.EngOBCOESC
From $3,000

📊 Energy, Lighting & Efficiency

📊
Energy Modelling & Auditing
ASHRAE-level audits, ECM analysis, NPV/IRR/payback, GHG reductions, NRCan incentive documentation.
RETScreenEnergyPlusHOMER Pro
From $3,200 (incl. RETScreen)
💡
Lighting Design & Simulation
Photometric simulation, lux uniformity, W/m² compliance (ASHRAE 90.1/NECB), UGR, emergency lighting.
DIALux EvoVisual
From $1,800
📈
Demand Management
Peak demand analysis, load shifting strategies, demand response program support, interval data review.
HOMERRETScreen
From $3,000 + equipment
🌱
Net-Zero & Decarbonization
GHG baseline assessments, decarbonization roadmaps, electrification strategies, carbon offset planning, net-zero target verification.
RETScreenEnergyPlusHOMER
From $5,500

🌿 Environmental Services

Environmental requirements coordinated alongside your engineering project: one firm, one scope, no gaps between engineering and environmental deliverables.

🔍
Phase I ESA
Desktop study, site reconnaissance, regulatory database search per CSA Z768. Required for property transactions and project financing.
From $3,500
🧪
Phase II ESA
Intrusive soil and groundwater investigation per CSA Z769. Borehole drilling, lab analysis, regulatory comparison.
From $8,500
📋
Compliance Audit
Environmental permit review, gap analysis, and corrective action planning for facility upgrades and expansions.
From $4,500
💨
Air Quality Assessment
Emission assessments, stack testing, AERMOD dispersion modelling, and ECA applications for industrial projects.
From $5,000
🌧️
Stormwater Management
SWM plans for solar farms, developments, and infrastructure. Coordinated with electrical site plans.
From $5,000
📊
Environmental Impact Assessment
EIS and Class EA studies for solar farms, substations, and major infrastructure projects.
From $5,000
🔬
Remediation & Risk Assessment
HHRA, ecological risk assessment, remediation action plans. Sequenced with construction schedule.
From $12,000
🌡️
GHG Reporting
Scope 1+2 GHG inventory, carbon accounting, regulatory reporting. Supports net-zero goals for energy projects.
From $3,500
📈
ESG Reporting & Strategy
ESG strategy, GRI-aligned reporting, TCFD/CSRD alignment. Communicates your engineering and safety investments.
From $10,000
🌿
Not sure which environmental services your project needs?

Take our environmental requirements assessment: get a filtered list based on your project type, property history, and regulatory context.

Environmental Assessment →
Transparent Pricing

Three Tiers, One Standard of Quality

Every scope is scoped honestly. These tiers set expectations: not limits on the engineering.

Basic
Core deliverables, email support, standard timeline. Best for straightforward scopes.
  • Core deliverable set
  • One review cycle
  • Email support
  • Standard timeline (4–6 wks)
MOST POPULAR
Standard
Full deliverables, professional quality, typical project timelines. This is our baseline tier.
  • ✓Full deliverable package
  • ✓Two review cycles
  • ✓Phone + email support
  • ✓Standard + minor rush capacity
Premium
Expedited delivery, extended revisions, added coordination including site visits when required.
  • Full + extended deliverables
  • Unlimited review cycles
  • Priority scheduling
  • Site visits / presentations
Get a Project Estimate →

Last updated: March 2026