Engineering · Safety · Renewables

Safety & Engineering Consulting
for Canadian Infrastructure

Solar PV, BESS, EV charging, electrical engineering, power systems studies, lighting, environmental compliance, and health & safety, all under one P.Eng, coast to coast.

☀ Free Solar Feasibility Study Explore Services →
2.58 GW+
Solar Experience
3,100+
Projects Engineered
52
Service Capabilities
P.Eng
Sealed Deliverables
🏛 P.Eng Licensed in Ontario
📐 ETAP · HelioScope · PVsyst · DIALux
⚡ ESA & AHJ Compliant Drawings
🛡 COR Safety Programs
☀ NREL PVWatts® Powered
Why This Matters

Why Does Your Project Need a P.Eng Stamp?

Without a P.Eng stamp, your project doesn't move. Without proper safety documentation, you don't get on site.

🔏
P.Eng Licensed
Municipalities require P.Eng sealed electrical drawings before issuing permits. No seal = no permit, no interconnection, no occupancy.
⚡
Utility Interconnection
Net metering and grid-tied solar require P.Eng stamped single-line diagrams and connection agreements.
🏦
Financing & Insurance
Lenders, insurers, and investors require engineer-certified documentation before releasing funds.
🏗
ESA & Code Compliance
The Electrical Safety Authority requires P.Eng involvement for complex installations and new builds.
⚖
Legal Liability Protection
P.Eng stamped deliverables establish duty-of-care documentation and protect all parties.
🛡
Site Safety Access
Contractors can't mobilize without COR-aligned safety plans, LOTO procedures, and arc flash documentation.
Instant Solar Estimate

How Does Our Free Solar Study Work?

Enter your address and annual electricity use. Our tool runs NREL PVWatts® V8 (the industry-standard solar simulation engine) and returns a full preliminary analysis in seconds, including Canadian incentive stacking.

  • PV system size (kWp)
  • Annual generation vs. consumption chart
  • Estimated annual savings (CAD)
  • Federal + provincial rebate analysis
  • Payback period estimate
  • Guided next steps for BESS, EV, efficiency
Get My Free Solar Study →

Takes 60 seconds. No commitment. Instant results.

Example Report: 10,000 kWh/yr · Markham, ON
NREL PVWatts® V8
System
9.3
kWp
Output
11,240
kWh/yr
Savings
$1,900
CAD/yr
Gross Cost
$20,460
installed
After Rebates
$15,460
net est.
Payback: 7.0 yrs (after rebates · 5%/yr rate escalation)
0 yr 10 yr 20 yr 25 yr
25-Year Net Earnings
$75,221
💰 Total profit after system pays for itself
Rebates applied: Ontario Home Renovation Savings $5,000 · Net Metering (retail-rate credits) · No active federal grant
Illustrative example. Real results computed live from NREL satellite data for your address.
Our Capabilities

52 Services, Three Domains, One Firm

Every capability runs on the same foundation: validated simulation software, documented workflows, P.Eng review, and upfront pricing.

☀️
Solar PV & Renewable Energy
PV system design, battery storage, microgrid sizing. Drone 3D site capture, shade analysis, Aurora-ready roof models, full permit packages.
HelioScopePVsystAuroraHOMER
From $2,500 → View Details →
⚡
Electrical Engineering
Load calculations, panel schedules, single-line diagrams, permit drawing sets, EV charger design, and commissioning & startup services.
ETAPAutoCADSKM
From $4,000 → View Details →
💡
Lighting Design & Simulation
Photometric simulation, lux uniformity, W/m² compliance, glare control (UGR), emergency lighting verification. Code-compliant deliverables.
DIALuxDIALux EvoVisual
From $1,800 → View Details →
🔬
Power Systems Studies
Arc flash (IEEE 1584), short circuit, load flow, coordination, power factor correction, harmonics analysis (IEEE 519).
ETAPOpenDSSEasyPower
From $4,500 → View Details →
📊
Energy Modelling & Auditing
ASHRAE-level audits, baseline modelling, ECM analysis, NPV/IRR/payback, GHG reductions, feasibility studies.
RETScreenEnergyPlusHOMER Pro
From $3,200 → View Details →
🛡️
Health & Safety Consulting
COR certification support, Construction Safety Plans, LOTO procedures, JHA, hazard assessments, and audit preparation.
COR ProgramsOH&SCSA
From $1,700 → View Details →
View All Services & Workflows →
Our Process

How Do We Take You From Concept to Commissioned?

Every project follows the same rigorous methodology, regardless of service type.

1
Discovery
15-min consult. Understand your site, goals, and timeline.
2
Assessment
Site data, utility info, drawings, and field conditions.
3
Design
Simulation software, layout, system sizing, and engineering calcs.
4
Permit
P.Eng sealed drawings, AHJ submission, reviewer liaison.
5
Commission
Construction support, commissioning witness, and turnover.
Start with a Free Solar Study →
or book a 15-min consult directly →
Professional Accountability

Engineer of Record & Owner's Engineer

A named P.Eng embedded in your project from Day 1, covering design accountability, health & safety governance, and construction-phase oversight so nothing falls through the cracks.

⚙️
Engineer of Record (EoR)
A named P.Eng assumes full accountability. Stamped drawings, code compliance, AHJ liaison from submission through permit approval.
🔍
Owner's Engineer (OE)
We sit on your side of the table, reviewing contractor submissions, verifying quality, and protecting your investment.
🛡
H&S Engineering Oversight
Safety embedded in engineering from day one. Arc flash studies, LOTO procedures, and site-specific safety plans.
What We Deliver
  • Sealed electrical & civil drawings
  • Ontario Electrical Safety Authority (ESA) submissions
  • Utility interconnection packages (net metering, DER)
  • Code compliance review (CEC, NBC, local amendments)
  • Contractor tender evaluation & scope validation
  • Shop drawing and submittal review
  • Site visits and construction progress reports
  • Commissioning witness and turnover verification
  • Site-specific safety plans aligned to engineering scope
  • Arc flash hazard analysis (IEEE 1584 / NFPA 70E)

Last updated: March 2026