Is a CSP legally required in Ontario?

Under the OHSA and O.Reg. 213/91 (Construction Projects), the constructor must ensure a safety program is in place. While the regulation does not prescribe a specific document format, a written CSP is the standard of practice to demonstrate due diligence and is required for COR certification.

How often should a CSP be updated?

The CSP should be treated as a living document. Update it whenever a new trade mobilizes, a significant hazard is introduced, or after any serious incident. At minimum, review monthly on active projects.

Can one CSP cover multiple projects?

A generic template can serve as a starting point, but each project must have a site-specific CSP addressing the unique hazards, trades, site layout, and emergency procedures for that location. A copy-paste approach fails audits.

What standard governs LOTO in Ontario?

O.Reg. 851 (Industrial Establishments) s.75 requires measures to prevent equipment startup during maintenance. CSA Z460 "Control of Hazardous Energy" is the referenced standard of practice. Federally regulated workplaces follow Canada Labour Code Part II.

How often must LOTO procedures be audited?

CSA Z460 requires at least an annual audit of the LOTO program. Each procedure should be observed at least once per year. Any equipment modification, incident, or near-miss involving energy isolation should trigger an immediate review.

Fall Protection Plan Ontario

Engineered fall protection plans, anchor point certification, equipment inspection programs, and rescue procedures for any work at heights above 3 metres.

At what height is fall protection required in Ontario?

Under O.Reg. 213/91 (Construction Projects), fall protection is required at 3 metres (10 feet) and above, or at any height above operating machinery, open pits, or hazardous substances. Industrial workplaces under O.Reg. 851 do not specify a height; the employer must protect against any fall hazard.

Key Deliverables

Fall Protection Program document
Fall hazard assessment (site-specific)
Anchor point inventory & certification
Equipment inspection checklist & schedule
Rescue plan (self-rescue, assisted, mechanical)

How often must fall protection equipment be inspected?

Pre-use inspection by the worker before each use (visual and tactile). Formal inspection by a competent person at least annually or per manufacturer recommendations. Harnesses and lanyards must be removed from service after any fall arrest event.

Compliance	OHSA, O.Reg 213/91, CSA Z462
Coverage	All Canadian provinces
Tiers	Basic, Standard, Premium